If you have got the tiles down on the floor or up in the wall, it is essential to consider sealing them especially if you want your job to appear professional and clean. Natural stone tiles like marble, travertine, granite, and slate are porous and require to be sealed. However, non-porous ones such ceramic and porcelain do not need sealing. Tile sealing Perth experts provide can improve the appearance and longevity of your tiles.
Why seal your tiles?
Porous tiles tend to absorb stains and spills fairly easily. Sealing the tiles on either your floor or walls will protect their surface, lower the overall maintenance cost, and prevent discoloration. Tile sealing Perth professionals provide can also improve the durability of your tiles. In simple terms, tile sealing in Perth can enhance:
• Surface protection
• Stain prevention
• Surface enhancement
Basic categories of sealers:
These types are normally composed of latex and silicone solids suspended in water or mineral spirits. When these sealers are applied, the carrier evaporates, leaving behind the solids within the tile. The solid material fills up the pores within the tiles thereby reducing their ability to absorb staining material.
Top coat sealers
These sealers protect the tiles by adding a protective coat over their surfaces. They are most appropriate for tumbled natural stones like travertine and rough marble. They can also be applied to polished stones like the granite. Membrane forming sealers remain on the tiles’ surface forming a nonporous membrane that creates a glossy finish. They are good for unglazed tiles because they don’t adhere properly to the glazed ones. With this type of a sealer, tile sealing Perth experts provide can protect and improve the attractiveness of your tiles. Check out their website at Grout Pro
The working mechanism of impregnating sealers is very similar to that of penetrating sealers. However, they go deeper within the tiles than the penetrating sealers where they bond with the molecules. This ensures the tiles are protected against all forms of moisture and stains. Some of these types come with antifungal and anti-bacterial properties to give tiles extra protection.
Natural oil sealers
These can be the best option for the eco-friendly homeowners. However, their longevity is relatively short when it comes to processes such as Perth tile sealing. One of the most commonly used types is linseed oil. It is used as a natural organic sealer and it requires to be reapplied once after every few months because it wears off quickly.
How to seal porous tiles
Porous tiles must be sealed before grouting. This will ensure the grouting does not leak into the tiles and does not ruin the finish. Removing and cleaning up a spoilt finish is next to impossible. Start by putting a small amount of the sealant into a medium sized bottle. Work on one tile at a time. The sealant should be spread evenly across every tile to enhance uniformity.
The sealed tiles should be left for about 24 hours before grouting. If you want to get a higher level of finish, apply another coat of sealant immediately after grouting. You can finish the tiled area by caulking the tile edges. Referrals from friends can help you find the best tile sealing Perth has to offer. See more http://www.groutpro.com.au/find-a-tile-and-grout-cleaner-specialist/western-australia/tile-grout-cleaning-perth-northern/